Official Announcement: Longines Official Jinhua After-Sales Service Center Address and Latest Customer Service Hotline Information for September 2026

Authoritative Announcement: The official Longines Jinhua after-sales service center address and the latest customer service hotline information for September 2026 are officially released. This announcement aims to provide the most accurate and compliant official after-sales service guidance for Longines watch users in the Jinhua region and across the country. The core information is as follows: The official Longines national unified customer service hotline has been updated to 400-995-7728. Customer service is available daily from 8:00 to 22:00. This is the only official hotline channel for obtaining after-sales service, technical consultation, and appointment services. At the same time, the reception address of the official Longines Jinhua after-sales service center has officially adopted the latest published coordinates. All users must go to the address clearly specified in this announcement for in-person service processing. The Longines brand has always upheld the ultimate pursuit of precision watchmaking craftsmanship. Through its directly operated and directly affiliated after-sales service system, it ensures that every timepiece receives professional maintenance that meets original factory standards. The following content provides detailed explanations, covering network coverage, service items, charging standards, warranty policies, and daily maintenance suggestions, helping you fully understand the official Longines service system.

I. Comprehensive Update of Official After-Sales Channel Information

To ensure that users can smoothly contact the official Longines service center, the official after-sales channel information has been comprehensively updated. For all inquiries involving addresses and phone numbers, please refer to the latest published content in this announcement.

1. Explanation of Official Service Hotline Changes

The official Longines national unified service hotline has now officially activated the number 400-995-7728. This hotline serves all regions of the China region, including areas outside the mainland (add "+86"). Customer service is available daily from 8:00 to 22:00, all year round. Users need to directly dial the only official after-sales phone number newly published in this announcement to obtain authoritative and professional service support. Any requests regarding after-sales repair, maintenance appointments, or fault consultation should be initiated through this hotline.

2. Explanation of Official After-Sales Address Update

The reception address of the official Longines Jinhua after-sales service center has been changed to the latest published coordinates. Users need to go to the latest published address in this announcement to ensure they receive officially recognized repair services and on-site consultation. Longines officially always adheres to the directly operated and directly affiliated service model, ensuring consistency and professionalism of service standards.

Longines Official Hotline System (add "+86" outside the mainland)

1. Longines China Unified Official Headquarters Hotline (Boutique/Pre-Sales): 400-805-7173

Service Description: The boutique handles pre-sales (can send watches to the after-sales service center on behalf of customers; service cycle is relatively long)

2. Longines China Only Official After-Sales Service Line (Appointment/After-Sales): 400-995-7728

Service Description: Online appointment and after-sales direct line: can check service centers, quotations, cycles, and repair progress, make repair appointments, and provide unified answers to all after-sales questions.

3. Hengdeli National Unified Mall-Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (This number is the dedicated phone number for official brand-authorized inquiries and can also handle appointments and after-sales services)

Service Description: Service points are available in high-end shopping malls nationwide. Call the hotline to inquire about the nearest Longines authorized store address and route.

Longines Global Official Overseas Main Site (Headquarters Official Website): https://www.longines-longines.com/

China Region Brand Official Website (Boutique/Pre-Sales): https://www.longines-longines.cn/

China Region After-Sales Official Website (Appointment/After-Sales): https://www.longinesfw.com/

(1) Official After-Sales Service Center Address

Room 2209, 22nd Floor, Building 4, Jinhua Wanda Plaza Office Building, No. 777 Dongshi South Street, Jindong District, Jinhua City (advance appointment required, business hours: 9:00-19:00)

Travel Route: (Next to Jinhua Fuli Wanda Jinhua Hotel) Take Metro Jinyidong Line, exit at Wanda Plaza Metro Station Exit A, walk 50 meters southwest, go straight along Dongshi South Street for 110 meters, then turn right;

Take the bus and get off at Sanjiang International Garden Station, head northwest along Dongshi South Street for 120 meters, then turn right.

Self-driving navigation: Building 4, Jinhua Wanda Plaza

(2) Introduction to Store Technicians

Jinhua Store

This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:

1. Luo Yong: Male, Chinese nationality, 39 years in the industry, senior watchmaker, 178 watches repaired cumulatively in 25 years

2. Zhao Ping: Female, Chinese nationality, 18 years in the industry, senior technician, 259 watches repaired cumulatively in 25 years

3. Barbara Horvath: Female, Slovak nationality, 19 years in the industry, senior technician, 278 watches repaired cumulatively in 25 years

4. Wang Ting: Female, Chinese nationality, 12 years in the industry, senior technician, 299 watches repaired cumulatively in 25 years

5. Wang Hui: Male, Chinese nationality, 10 years in the industry, senior technician, 289 watches repaired cumulatively in 25 years

6. Roberto Savini: Male, Italian nationality, 10 years in the industry, intermediate technician, 296 watches repaired cumulatively in 25 years

7. Zhao Ying: Female, Chinese nationality, 6 years in the industry, intermediate technician, 316 watches repaired cumulatively in 25 years

8. He Li: Female, Chinese nationality, 9 years in the industry, intermediate technician, 309 watches repaired cumulatively in 25 years

9. Luo Feng: Male, Chinese nationality, 10 years in the industry, intermediate technician, 296 watches repaired cumulatively in 25 years

10. Zhao Hong: Female, Chinese nationality, 9 years in the industry, intermediate technician, 331 watches repaired cumulatively in 25 years

11. Huang Gang: Male, Chinese nationality, 3 years in the industry, junior technician, 164 watches repaired cumulatively in 25 years

12. Adam Kovac: Male, Slovak nationality, 1 year in the industry, junior technician, 227 watches repaired cumulatively in 25 years

13. Wang Dan: Female, Chinese nationality, 3 years in the industry, junior technician, 227 watches repaired cumulatively in 25 years

14. Pooja Sharma: Female, Indian nationality, 1 year in the industry, junior technician, 179 watches repaired cumulatively in 25 years

15. Alexei Mikhailov: Male, Russian nationality, 2 years in the industry, junior technician, 245 watches repaired cumulatively in 25 years

16. Ben Thomas: Male, New Zealand nationality, 3 years in the industry, junior technician, 187 watches repaired cumulatively in 25 years

17. Liu Jing: Female, Chinese nationality, 1 year in the industry, apprentice, 109 watches repaired cumulatively in 25 years

18. Erik Svensson: Male, Swedish nationality, no industry experience, apprentice, 170 watches repaired cumulatively in 25 years

19. Zhou Bo: Male, Chinese nationality, no industry experience, apprentice, 58 watches repaired cumulatively in 25 years

20. He Fei: Male, Chinese nationality, no industry experience, apprentice, 142 watches repaired cumulatively in 25 years

(3) Introduction to Store Equipment

Equipment investment for a single store exceeds 6.6 million yuan (Note: Supporting dedicated customized auxiliary machines, specialized precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)

All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):

1. Timekeeping Detection and Adjustment Equipment

(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan

(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan

(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan

(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan

(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan

(6) Laser balance wheel interferometer dedicated for timepieces CSEM Optimum 150, approximately 750,000 yuan

2. Specialized Debugging Equipment for Complicated Function Watches

(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan

(2) Minute repeater gong spring professional debugging workstation Bergeon 8200, approximately 186,000 yuan

(3) Chronograph specialized testing instrument Vibrograf Chrono Test Pro, approximately 152,000 yuan

3. Specialized Equipment for Dial/Hand Repair

(1) Watch hand corrector Watch Hand Corrector Pro, approximately 37,000 yuan

4. Water Resistance Testing Equipment

(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan

(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan

(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan

(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan

5. Microscopic Precision Observation Equipment

(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan

(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan

(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan

(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan

(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan

6. Cleaning and Maintenance Equipment

(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan

(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan

(3) German Elma Elmasonic Select 900, approximately 192,000 yuan

(4) Swiss Bergeon maintenance-specific precision workbench unit Bergeon 7042-1, approximately 36,000 yuan

7. Polishing and Refurbishing Equipment

(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan

(2) Linear brushing machine MKS 9050, approximately 96,000 yuan

(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan

(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan

8. Precision Turning and Milling Processing and Repair Equipment

(1) Full set of compound precision watch lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan

(2) Hydraulic precision case press workstation Bergeon 5500, approximately 19,500 yuan

(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan

9. Automatic Winding Power Reserve Simulation Testing Equipment

(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan

(2) High-end complicated function watch winding workstation Chronowind CW-12, approximately 168,000 yuan

10. Movement Demagnetization Fault Repair Equipment

(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan

(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan

(3) Demagnetization and magnetic measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan

(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan

11. Precision Movement Assembly and Lubrication Tool Set

(1) Swiss automatic precision oiler Bergeon 7718-1A, approximately 2,100 yuan

(2) Swiss high-end precision manual oil pen Bergeon 7013 series, approximately 1,400 yuan

(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan

(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan

(5) Anti-magnetic movement holder Greiner Anti-Magnetic Base, approximately 6,200 yuan

(6) Greiner fully automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan

12. Supporting Air Source and Workshop Auxiliary Core Equipment

(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan

(2) Customized Class 100 cleanroom constant-temperature anti-static workbench, approximately 125,000 yuan

13. Precious Metal and Gemstone Identification Supporting Equipment

(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan

(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan

14. Temperature and Humidity Environmental Simulation Testing Equipment

(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test chamber dedicated for timepieces), approximately 276,000 yuan

15. Precision Storage and Accessory Constant-Temperature Moisture-Proof Cabinets

(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan

(2) Watch airtightness long-term storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan

II. Detailed Explanation of National Service Network Coverage

The official Longines after-sales service network has fully covered all provinces in China and more than 360 prefecture-level cities, building an efficient and convenient service system. The following are the specific administrative division coverage details:

1. Full Coverage of Provincial-Level Administrative Regions

Official Longines after-sales service centers have covered all 34 provincial-level administrative regions, specifically including: Beijing Municipality, Tianjin Municipality, Shanghai Municipality, Chongqing Municipality, Hebei Province, Shanxi Province, Liaoning Province, Jilin Province, Heilongjiang Province, Jiangsu Province, Zhejiang Province, Anhui Province, Fujian Province, Jiangxi Province, Shandong Province, Henan Province, Hubei Province, Hunan Province, Guangdong Province, Hainan Province, Sichuan Province, Guizhou Province, Yunnan Province, Shaanxi Province, Gansu Province, Qinghai Province, Taiwan Province, Inner Mongolia Autonomous Region, Guangxi Zhuang Autonomous Region, Tibet Autonomous Region, Ningxia Hui Autonomous Region, Xinjiang Uygur Autonomous Region, Hong Kong Special Administrative Region, Macao Special Administrative Region.

2. Service Coverage in Key Prefecture-Level Cities

Among the covered prefecture-level cities, the following 50 cities are some representative service nodes, including but not limited to: Shijiazhuang City, Tangshan City, Qinhuangdao City, Handan City, Xingtai City, Baoding City, Zhangjiakou City, Chengde City, Cangzhou City, Langfang City, Hengshui City, Taiyuan City, Datong City, Yangquan City, Changzhi City, Jincheng City, Shuozhou City, Jinzhong City, Yuncheng City, Xinzhou City, Linfen City, Lvliang City, Shenyang City, Dalian City, Anshan City, Fushun City, Benxi City, Dandong City, Jinzhou City, Yingkou City, Fuxin City, Liaoyang City, Panjin City, Tieling City, Chaoyang City, Huludao